Chemtools®... because it simply works 02 4735 3126

Available in the following sizes:

50ml & 250ml

CT-8510-50   -   CT-8510-250

ChemTools 8510 is an anaerobic gasket sealant, which develops medium strength in a short time.  The product cures rapidly in the absence of air between close fitting metal surfaces.

ChemTools 8510 is a high temperature resistant gasketing sealant with excellent chemical resistance.

Applications:

• Used as a form-in-place gasket on flanged connections.

• Typical uses are engine casings and gearbox.

• Thixotropic nature reduces the migration of liquid product after application.

Adhesive Properties:

Composition:                                                   Dimethacrylate Ester

Color:                                                              Red

Viscosity:                                                         188,000 – 500,000cps

Thixotropic                                          Brookfield RVT Spindle 7@20rpm @ 25°C

Specific Gravity:                                              1.10

Flash Point:                                                     >93°C

Solvent Content:                                             None

Curing Properties:

Handling Cure Time, Primed Surface:           2 - 8 hours

Handling Cure Time, Unprimed Surface:       30 min - 4 hours

Compressive Shear Strength                         >7.5N/mm2 (1,085psi)

(ISO 10123) After 24 hrs at 22°C. Steel Pins & Collars

Lap Shear Strength                                         5N/mm2 (725psi)

(ISO 4587) Steel (grit blasted)

Tensile Strength                                              7.5N/mm2 (1,085psi)

(ISO 6922) Steel (grit blasted)

            Temperature Range                                       -50 to 80°C

Physical Properties:

Coefficient of Thermal Expansion:                 80×10-6

ASTM D 696, K-1

Coefficient of Thermal Conductivity:               0.10

ASTM C 177, W/ (m·K)

Specific Heat, kJ/ (keg)                                        0.30

Chemical Resistance:

Chemical            Temperature                     % Initial Strength Retained

500 hours       1000 hours

Acetone                       22°C                              100                   95

Ethanol                        22°C                               90                    85

Motor Oil                      125°C                            100                  100

Petrol                           22°C                               75                    75

Brake Fluid                  22°C                               95                    95

Water/Glycol               87°C                              110                  110

Application Method:

·         For best results, clean all surfaces (external and internal) with a cleaning solvent and allow the solvent to evaporate.

·         If the material is an inactive metal or the cure speed is too slow, spray with Activator 8071 or 8049 and allow drying.

·         Apply manually as a continuous bead or by screen-printing to one surface of the flange.

·         Low pressure can be used when testing to confirm a complete seal immediately after assembly.

·         Flanges should be tightened as soon as possible after assembly to avid shimming.

Storage:

Anaerobic adhesives shall be ideally stored in a cool, dry place in unopened containers at a room temperature between 7°C to 28°C. Please do not return any unused material to its original container.

PRECAUTIONS:  This product capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS) for this and all other products being used are understood by all persons who will work with the material.

Warranty:  All products purchased from or supplied by ChemTools are subject to terms and conditions set out in the contract. ChemTools warrants only that its product will meet those specifications designated as such herein or in other publications. All other information supplied by ChemTools is consider accurate but are furnished upon the express condition the customer shall make its own assessment to determine the product’s suitability for a particular purpose. ChemTools makes no other warranty, either express or implied, including those regarding such other information, the data upon which the same is based, or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose; or that the use of such other information or product will not infringe any patent.