Chemtools®... because it simply works 02 4735 3126

Available in the following sizes:

10ml, 50ml & 500ml

CT-8460-10 - CT-8460-50   -  

 CT-8460-500

ChemTools 8460 is a high viscosity cyanoacrylate adhesive with low odour and low blooming characteristics. This technology offers excellent product performance and easy processing. It eliminates the need for ventilation and reduces frosted residues in critical cosmetic bonding.

APPLICATIONS:

• Suitable for assembling a wide variety of industrial and medical devices.

• Rapid bonding of a wide range of plastics, rubbers, wood, metals and elastomeric materials.

Bonds:

      Acrylic                                 Polycarbonate                     Polyamide

      PVC                                     PEEK                                  PETG

      Polysulfone                         Wood                                  Latex

      Steel                                    Aluminium                           Zinc Dichromate

BONDING TIMES:

Under normal conditions, the surface moisture initiates the curing process. Functional strength is developed in a short time but curing continues for at least 24 hours before full chemical/solvent resistance is developed. The rate of cure will depend upon the substrate used.

Stainless Steel            30-70 seconds            ABS                 20-60 seconds

Polycarbonate             20-60 seconds            PVC                 20-50 seconds

Neoprene                    < 5 seconds                Phenolics        30-60 seconds

Aluminium                   5-20 seconds              Nitrile Rubber  5-7 seconds

PHYSICAL PROPERTIES:

Composition                                        Alkoxy-Ethyl Cyanoacrylate

Appearance                                         Colourless liquid

Viscosity                                              45 cps

@ 250C Brookfield LVF

Cured Adhesive

Gap Filling                                           0.15mm

Tensile Shear Strength                       15-26 n/mm2

Service Temperature Range              -60 to +80ºC

Full Cure                                             24 hours

Melting Point Temperature                  160 to 170ºC

Mechanical Properties

Glass Transition Temperature, ASTM E228, ºC               130

Dielectric Strength, ASTM D149, v/mil                               625

Coefficient of thermal expansion, ASTM D696, K-1               80 x 10-6

Coefficient of thermal conductivity,                             0.1

ASTM C177, W.m-1K-1

Shear Strength

ASTM D 1002/DIN 53283

Grit Blasted Steel                                14-22 N/mm2

Etched Aluminium                               10-15 N/mm2

Neoprene Rubber                               10-15 N/mm2

Polycarbonate                                     5-10 N/mm2

Chemical Resistance Properties:

Chemical                    Temp.             % Initial strength retained

                                                                        500 hours        1000 hours

Isopropanol                 22°C                85                    85

Petrol                           22°C                80                    75

Motor Oil                      40°C                90                    90

Mineral Spirit               22°C                90                    90

APPLICATION INSTRUCTIONS

• All surfaces must be clean, dry, dust and grease free. Best result will be achieved with surfaces that have been lightly abraded immediately prior to bonding.

• If using accelerator apply to one component surface only. Apply thin film of adhesive to the other surface and bring the pieces together immediately. Hold for few seconds without disturbing the joints.

• Thin bond lines favour high cure speed. Increasing the bond gap will slow down the rate of cure.

PRECAUTIONS:  This product capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS) for this and all other products being used are understood by all persons who will work with the material.

Warranty:  All products purchased from or supplied by ChemTools are subject to terms and conditions set out in the contract. ChemTools warrants only that its product will meet those specifications designated as such herein or in other publications. All other information supplied by ChemTools is consider accurate but are furnished upon the express condition the customer shall make its own assessment to determine the product’s suitability for a particular purpose. ChemTools makes no other warranty, either express or implied, including those regarding such other information, the data upon which the same is based, or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose; or that the use of such other information or product will not infringe any patent.